Emerson 1410S Reference Manual page 17

Reference Manual
00809-0600-4410
2.3.8 Time settings
The Gateway is the timekeeper for the WirelessHART
Gateway's time is accurate for timestamp data to be meaningful. Time settings can be
found by navigating to System Settings → Gateway → Time as shown in
changes made to the time settings will have to be done to both networks for consistency.
There are three ways to set the Gateway time:
Procedure
1. Network Time Protocol (recommended). This option uses a Network Time Protocol
2. Set with PC Time. This option will match the Gateway's time to the PC/Laptop.
3. Manual Entry. This option allows the user to enter a specific date (MM:DD:YY) and
2.3.9 To change the TCP/IP network settings
Procedure
1. Navigate to System Settings → Gateway → Ethernet Communication.
Emerson 1410S/781S
(NTP) server to adjust the Gateway's time to match the time of the control network.
a) Enter the IP address for the NTP server.
b) Select the packet version (i.e. 1, 2, 3, or 4).
time (HH:MM:SS).
Note
Network Time Protocol (NTP) is recommended for the best network performance
because it always adjusts time to match the network time server.
Configuration
®
network, so it is imperative that the
Windows
May 2020
7. Any
17