Resetting The Therapy; Changing The Infusion Line; Ending The Infusion; Switching Off The Device - B. Braun Infusomat compact plus Instructions For Use Manual

Operation

Resetting the therapy

8.11
The "Reset therapy" function is used to
delete all currently set therapy data. A new
therapy can be started.
"Reset therapy" can only be selected
Note:
if the therapy has been stopped.
Press the menu key and select Reset
Q
therapy and press OK to confirm.
Press the up arrow key to reset the
Q
therapy.
Note: the infused volume (inf. vol.) is not
reset.

Changing the infusion line

8.12
Press the Start/Stop key to stop the
Q
infusion.
The green LED turns off.
Disconnect the line from the patient
Q
and close the roller clamp.
Open the pump door by pulling the
Q
door lever. Grip the door lever from
behind and pull it forward.
Remove the infusion line.
Q
Insert the new infusion line,
Q
see section 8.2.
Start the infusion, see section 8.4.
Q

Ending the infusion

8.13
Press the Start/Stop key to end the
Q
infusion.
The green LED turns off.
Disconnect the line from the patient
Q
and close the roller clamp.
Open the pump door by pulling the
Q
door lever. Grip the door lever from
behind and pull it forward.
Remove the infusion line.
Q
Close the pump door while simultane-
Q
ously pulling the door lever.

Switching off the device

8.14
Infusion ended
Q
Note: The device cannot be switched off if
a disposable item is inserted. Instead it will
go into standby mode.
Press the On/Off key for approx.
Q
1.5 seconds.
The device switches off.
33