Setting The Infusion Values; Entering The Delivery Rate; Starting And Stopping The Infusion - B. Braun Infusomat compact plus Instructions For Use Manual

Operation

Setting the infusion values

8.4
Infusion line inserted and selected
Q
Note: Depending on the last therapy, the
pump starts either when the delivery rate is
entered or when a drug is selected.

Entering the delivery rate

8.4.1
Enter the delivery rate using the arrow
Q
keys.
Start the infusion with the Start/Stop
Q
key.
- or -
Press OK to confirm the rate.
Q
The Overview screen is displayed.
Select Vol./Time and press OK to con-
Q
firm.
Enter the volume or time limit and
Q
press OK to confirm.
Any values still missing are automati-
cally calculated and displayed.
Note: In addition to the volume and time
limit, the infusion rate can also be adjusted
in the Overview screen.
Start the infusion with the Start/Stop
Q
key.
Starting and stopping
8.5
the infusion
Values for the treatment set
Q
Press the Start/Stop key to start the
Q
infusion.
The moving arrows in the display and
the green LEDs show that the delivery
is taking place.
Note: The infusion rate set can be changed
during an ongoing infusion by pressing the
OK key.
Interrupt or stop the infusion by press-
Q
ing the Start/Stop key.
Note: After stopping the therapy,
"Reset therapy" must be selected in the
menu before a new therapy can be started.
27