Activating Standby; Administering A Bolus; Administering A Manual Bolus - B. Braun Infusomat compact plus Instructions For Use Manual

Operation

Activating standby

8.6
In the event of longer interruptions, the user
has the option of retaining the set values
and continuing the infusion at a later time.
Activating standby mode
Infusion line inserted and selected
Q
Press the On/Off key and hold it down
Q
until the pump indicates that it is in
standby mode.
Adjusting device standby time
Press the left arrow key.
Q
Enter the desired time and press OK
Q
to confirm.
Ending standby mode
Press the On/Off key or Back key.
Q
Press the Start/Stop key.
Q
The delivery is re-started with the
previously set values.
28

Administering a bolus

8.7
There are three different options for bolus
administration:
Manual bolus
Q
Bolus with preselection of the bolus
Q
volume
Bolus with preselection of the bolus
Q
volume and the bolus duration
Note: If the bolus administration is not
started after the Bolus key is pressed, the
device automatically returns to the delivery
screen for the ongoing infusion.
Note: The pressure alarm threshold is
automatically increased to 9 during bolus
administration.

Administering a manual bolus

8.7.1
Press the Bolus key.
Q
The "Bolus" screen is displayed.
Press the Bolus key again and hold it
Q
down.
Fluid is delivered as long as the key is
pressed or until the maximum duration/
dose have been reached. The delivered
bolus volume is displayed.
Release the Bolus key.
Q
The bolus administration is ended and
the infusion continued.