Advertisement
CR POWER RAKE Owner's Manual
INTENDED USE
INTENDED USE
This machine is designed for removing thatch from your lawn, renovation of existing lawns, and to assist in overseeding
operations. The machine should not be used for any other purpose than that stated above.
DO NOT operate if excessive vibration occurs. If excessive vibration occurs, shut engine off immediately and check for
damaged or worn reel, loose pulley bolts or set screws, loose engine or lodged foreign objects. (See troubleshooting section on
page 9).
INSTRUCTION LABELS
The labels shown below were installed on your BILLY GOAT
them before operating this equipment. Item numbers from the Illustrated Parts List and part numbers are provided for
convenience in ordering replacement labels. The correct position for each label may be determined by referring to the Figure and
Item numbers shown.
LABEL DANGER KEEP HANDS
AND FEET AWAY
ITEM #51 P/N 400424
LABEL CAUTION GUARD
ITEM #52 P/N 900327
ENGINE LABELS/CONTROLS
Briggs & Stratton
Set lever to choke when starting cold
Set lever to desired engine speed.
Move lever completely to the left
to stop engine
Part No 350518
®
CR Power Rake. If any labels are damaged or missing, replace
LABEL CLUTCH ITEM #49
P/N 830503
LABEL EXPLOSIVE FUEL
ITEM # 50 P/N 400268
3
DANGER FLYING DEBRIS
ITEM # 48 P/N 810736
LABEL INSTRUCTION HEIGHT ADJ.
ITEM #35 P/N 350224
350518_-_HI
Advertisement
