Related Manuals for Billy Goat AET60
Summary of Contents for Billy Goat AET60
- Page 1 AET60 Owner’s Manual AERATOR 60” Owner's Manual AET60 Beginning Serial #: 022417472 Original Instructions IMPORTANT- READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE Part No. 100384...
- Page 2 Table of Contents Specifications, Intended Use, Replacement Parts & Safety Instruction Labels, Packing Checklist, & Assembly Operation Maintenance and Troubleshooting Illustrated Parts and Part Lists Tine Replacement Kit Information Part No. 100384 100384_A_LO...
-
Page 3: Specifications
15 ° Table 1: Specifications Intended Use Your Billy Goat® Aerator This machine is designed for aerating established lawns and large grass covered areas. The machine should not be used for any other purpose than that stated above. DO NOT OPERATE IF EXCESSIVE VIBRATION OCCURS! If excessive vibration occurs, stop use of the unit immediately and check for damaged or worn reel, loose hardware, or lodged debris. -
Page 4: Instruction Labels
Instruction Labels The labels shown below were installed on your Billy Goat® Aerator. If any labels are damaged or missing, replace them before operating this equipment. Part numbers from the Illustrated Parts List are provided for convenience in ordering replacement labels. The correct position for each label may be determined by referring to the part numbers shown. -
Page 5: Operation
Item numbers in parentheses can be referenced in the Parts Illustration and Parts List on pages 7-9. Operating Instructions The AET60 is a combination of a tow-behind aerator and a 3-point aerator with two wings for adjustable aeration widths. When used behind a tractor in the 3-point application, there are pins on each tine assembly that can be removed to allow tines to swivel, enabling the tractor to turn while still aerating with the tines in the ground. -
Page 6: Periodic Maintenance
Operation Continued Tips • Mow - Mow the lawn to its normal cut height. • Water - For the best performance and maximum tine penetration the lawn should be thoroughly watered the day before aeration. • Inspect - Check the lawn before beginning work. Remove all rocks, wire, string, or other objects that can present a hazard during work prior to starting •... - Page 7 AET60 Parts Drawing Part No. 100384 100384_A_LO...
- Page 8 Part No. Description Quantity 381556 BASE FRAME WELDMENT 381557 LEFT WING FRAME WELDMENT 381558 RIGHT WING FRAME WELDMENT 380237 TINE ARM WA AET60 GEN 2 381560 WHEEL ASSEMBLY 381561 JACK ASSEMBLY 381562 OUTER TOW LINK 381563 INNER TOW LINK 380234...
- Page 9 AET60 Parts List Continued Item No. Part No. Description Quantity 381591 RUBBER BUMPER 1.0” X 1.0” THK 80150057 SHCS 10-32 X 1/2” 8171008 WASHER 3/4” SAE 381158 SHCS 10-32 X 1.25” 381595 RUBBER BUMPER 1.5” X 1.5” THK 381596 SHCS 1/4”-20 X 1.5”...
- Page 10 Tine Replacement Kit Information The new Billy Goat® AET60 is built with newly designed tines. Owners of previous Billy Goat AET60 models can purchase new tines in the form of a service kit (Part No. 380238). New owners can replace old or worn tines with the same service kit.