Billy Goat AE403V Owner's Manual
  1. Manuals
  2. Brands
  3. Billy Goat Manuals
  4. Lawn and Garden Equipment
  5. AE403V
  6. Owner's manual

Billy Goat AE403V Owner's Manual

Hide thumbs Also See for AE403V:
Table of Contents

Advertisement

Quick Links

Download this manual
AE401 Owner's Manual
TINE REEL KIT
Replacement reel with
tines for your aerator.
P/N 360352
IMPORTANT- READ CAREFULLY BEFORE USE AND KEEP FOR FUTURE REFERENCE.
AERATOR Owner's Manual
AE401H, AE401V
Beginning Serial #: 100515001
Replacement Parts and Accessories
SOLID SPIKE TINE
Complete set of spike
tines for the AE's reel.
P/N 360394-S
Original Instructions
TINE KIT
Individual coring tine for
replacement of worn or
broken tines.
P/N 360100
1
360390_B_HI

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AE403V and is the answer not in the manual?

Questions and answers

Related Manuals for Billy Goat AE403V

Summary of Contents for Billy Goat AE403V

  • Page 1 AE401 Owner’s Manual AERATOR Owner's Manual AE401H, AE401V Beginning Serial #: 100515001 Replacement Parts and Accessories TINE REEL KIT SOLID SPIKE TINE TINE KIT Replacement reel with Complete set of spike Individual coring tine for tines for the AE’s reel. tines for your aerator.
  • Page 2 AE401 Owner’s Manual CONTENTS SPECIFICATIONS AND SAFETY INSTRUCTION LABELS PACKING CHECKLIST & ASSEMBLY OPERATION MAINTENANCE AND TROUBLESHOOTING ILLUSTRATED PARTS & PARTS LIST 10-13 DECLARATION OF CONFORMITY 14-16 Go to http://www.billygoat.com for translations of the product manuals. Visitez http://www.billygoat.com pour la version canadienne-française des manuels de produits 360390_B_HI...

  • Page 3: Specifications

    AE401 Owner’s Manual SPECIFICATIONS AE401H AE401V Engine: HP 4.0 (2.98 kW) 5.5HP (4.1 Kw) Engine: Model GX120U1HX2 13L1520311F8 Engine: Type HONDA OHV B&S VANGUARD Engine: Fuel Capacity 2.1 qt. (2.0 L) 3.0 qt. (2.84 L) Engine: Oil Capacity 0.63 qt. (0.6 L) 0.66 qt.

  • Page 4: Instruction Labels

    INSTRUCTION LABELS ® The labels shown below were installed on your BILLY GOAT Aerator. If any labels are damaged or missing, replace them before operating this equipment. Part numbers from the Illustrated Parts List are provided for convenience in ordering replacement labels.

  • Page 5: Packing Checklist

    AE401 Owner’s Manual PACKING CHECKLIST Your Billy Goat is shipped from the factory in one carton, completely assembled. READ all safety instructions before assembling unit. TAKE CAUTION when removing the unit from the box. PUT OIL IN ENGINE BEFORE STARTING PARTS BAG &...

  • Page 6: Operation

    AE401 Owner’s Manual OPERATION AERATING OPERATION NOTE: NEVER PARK THIS UNIT ON A SLOPE OF ANY KIND. Always keep tines in the up position when parking the unit. TINES RAISING/LOWERING: The tines are raised or lowered into the ground by operating the tine engagement lever on the upper handle.

  • Page 7: Periodic Maintenance

    AE401 Owner’s Manual MAINTENANCE PERIODIC MAINTENANCE Periodic maintenance should be performed at the following intervals: Maintenance Operation Every Use Every 25 hrs Every 50 Hours (daily)  Inspect for loose, worn or damaged parts.  Check engine oil.  Inspect belt for wear. Engine (See Engine Manual) ...

  • Page 8: Adjusting Chain Tension

    AE401 Owner’s Manual 4. TO INCREASE belt tension adjust these two nuts so that the cable (item 55) is secured in place with an additional 1/4" of the threaded adjuster at the top of the assembly. TO DECREASE belt tension, adjust these two nuts so that the cable (item 55) is secured in place with 1/4" less of the threaded adjuster at the top of the assembly.

  • Page 9: Troubleshooting

    AE401 Owner’s Manual LUBRICATION BEARINGS (See pages 12 and 13 for Parts Illustration and Parts List) 1. Remove the top guard by removing the four nuts, two on each side that secures it to the frame. NOTE: Guard must be removed to lubricate the jackshaft bearings only.
  • Page 10 AE401 Owner’s Manual AE401 HANDLE PARTS DRAWING 360390_B_HI...
  • Page 11 AE401 Owner’s Manual AE401 HANDLE PARTS LIST ITEM AE401H AE401V DESCRIPTION Part No. Part No. FRAME ASSEMBLY WA AE402 360324 360324 WATER TANK 5.5 GAL 360238 360238 GUARD DRIVE COVER 360280 360201 WASHER 5/16 FENDER 8172020 8172020 NUT LOCK 3/8-16 8160003 8160003 TUBE FRONT BUMPER...
  • Page 12 AE401 Owner’s Manual AE401 ENGINE PARTS DRAWING 360390_B_HI...
  • Page 13 AE401 Owner’s Manual AE401 ENGINE PARTS LIST WASHER 1.062" ID X 1.75 OD 8172021 3 OR 4 8172021 3 OR 4 CHAIN MASTER LINK 360205 360205 WASHER 1/4" FC 8171002 8171002 360390_B_HI...

This manual is also suitable for:

Ae401v

Table of Contents