Raven SmarTrax Installation Manual page 10

3. Reconnect the original "R" hose to the opposite end of the supplied right tee connector.
4. Connect the supplied "R" hose (P/N 214-1000-100) to the branch end of the supplied right tee
connector. Connect the supplied "L" hose (P/N 214-1000-096) to the branch end of the
supplied left tee connector.
5. Gather supplied "L" and "R" hoses and route them backwards, through the left-side gap above
the front axle.
Routing supplied "L" and "R" hoses back towards the front axle
Connecting the "R" hoses to the right tee fitting
8