Table of Contents
Advertisement
OPTIMUM
M A S C H I N E N - G E R M A N Y
3.4.2 Assembly
WARNING!
Danger of crushing and overturning.
The geared drill must be installed by at least 2 people.
INFORMATION
The geared drill is delivered pre-assembled.
3.4.3 Load suspension point
WARNING!
Severe or lethal injuries due to damaged hoisting gear and load suspension gear or
hoisting gear and load suspension which is not sufficiently stable and breaks under
load.
Fix the load suspension gear around the drill head. To do so, use a lifting sling.
Use an appropriate hoisting device, e.g. a crane.
Make sure to have an equal load suspension so that the geared drill does not tilt when lift-
ing.
Make sure that the load suspension gear does not damage any add-on pieces or causes
damages to the paintwork.
Img.3-1:
Example of load suspension and lifting loads
3.5
Installation
Check if the foundation for the geared drill is leveled using a level.
Check if the foundation is sufficiently stable and rigid. The total weight amounts to 671
pounds.
US
B30 VGM
Page 22
Load suspension gear
Center of
gravity
Original operating instructions
Assembly
Version 1.0.3 dated July 22, 2014
Hide quick links:
Advertisement
Table of Contents
