Checking The Controller On-Time And The Robot Running Time And Resetting Their User Counters; Displaying The Controller On-Time And The Robot Running Time - Denso VM-G Series Installation & Maintenance Manual

3.8 Checking the Controller ON-Time and the Robot Running
Time and Resetting Their User Counters
You may check the robot controller ON-time and the robot running time in the Total
hours window of the teach pendant.
The Total hours window shows the following items:
[Total operation]
[Total running]
[Cumu. operation] Shows the total of the robot controller ON-time counted after you
[Cumu. running]
[Operation]
[Running]
3.8.1

Displaying the Controller ON-time and the Robot Running Time

STEP 1
Shows the grand total of the robot controller ON-time counted
after the controller leaves the factory.
Shows the grand total of the robot running time counted after the
robot leaves the factory.
reset the user counter to zero.
Shows the total of the robot running time counted after you reset
the user counter to zero.
Shows the ON-time of the robot controller counted after it is
turned ON this time.
Shows the running time of the robot counted after the robot
controller is turned ON this time.
Display the Maintenance window as shown below.
Access: [F6 Set]—[F6 Maint.] from the top screen
F1
Press [F1 Total h].
86