Validation And Responsibility; Limitation Of Liability; Overall Safety Warning - Omron Techman Robot Safety Manual

Validation and Responsibility

The information provided in this Manual does not include how to design, install and operate a complete arm
application, nor does it include the peripheral devices that will affect the overall system safety. The design and
installation of the complete system must comply with the standards and regulations for safety requirements in the
country located. The robot integrator needs to understand safety laws and safety regulations in the local countries,
in order to avoid major risks existing in the entire system.
This includes but is not limited to:
Performing a risk assessment of the whole system

Adding other machines and additional risk reduction measures based on the results of the risk assessment

Using appropriate software safety features

Ensuring the user will not modify any safety measures

Ensuring all systems are correctly designed and installed

Specifying instructions for use

Clearly marking the contact information of the integrator that installed the robot

Making relevant documents accessible, including the risk assessment, and this manual

CAUTION:
This product is partly completed machinery. The design and installation of the complete
system must comply with the safety standards and regulations in the country of use. The user
and integrators of the robot should understand the safety laws and regulations in their
countries and prevent major hazards from occurring in the complete system.

Limitation of Liability

Even if the safety instructions are followed, any safety-related information in the manual shall not be considered as
a guarantee that the product will not cause any personal injury or damage.

Overall Safety Warning

These safety warnings are relevant for the entire manual.
Safety Manual TECHMAN ROBOT Safety System 3.3 12