Chain - BMW S 1000RR Rider's Manual

Remove the hump cover
10
( 72).
198
Press locking mechanisms 1.
z
Release the data link connec-
tor 2 from the holder 3.
The interface for the diagnos-
tics and information system
can be connected to the data
link connector 2.
Fastening the data link
connector
Disconnect interface for diag-
nosis and information system.
Insert data link connector 2
into the holder 3.
The locking mechanisms 1 en-
gage.
with passenger package
Install passenger seat (
Install the hump cover (

Chain

Lubricate chain
ATTENTION
Insufficient cleaning and lu-
brication of the drive chain
Increased wear
Clean and lubricate the drive
chain regularly.
Lubricate drive chain at lease
every 500 mls (800 km). After
driving though water or dust
and dirt perform the lubrication
at shorter intervals.
Switch off ignition and engage
Neutral.
Clean drive chain with suitable
cleaning agent, dry and apply
chain lubricant.
To extend and maximize
OE
the chain's service life
BMW Motorrad recommends
73).
using BMW Motorrad chain
72).
lubricant or:
Lubricant
Chain spray
Wipe off excess lubricant.