BMW S 1000RR Rider's Manual page 188

10
186
Roll the rear wheel as far for-
ward as possible and remove
the chain 1 from the sprocket
wheel.
z
Pull out the brake-caliper sup-
port 1 to the front and set it to
the side.
Roll rear wheel toward rear out
of swinging arm.
NOTICE
The camshaft sprocket and the
spacing bushings on the left and
right are loosely inserted in the
wheel. During removal, make
sure that the parts are not dam-
aged or lost.
Install rear wheel
ATTENTION
Altering the tire size
Influence on the control systems
When converting the rear tire
size from 190 ⁄ 55 ZR 17 to
200 ⁄ 55 ZR 17 or vice versa,
the parameters of the control
systems must be encoded by
a BMW authorized workshop,
preferably by a BMW Motorrad
retailer.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.