BMW S 1000RR Rider's Manual page 185

and must not be loosened or
removed.
Loosen clamping bolts 2.
Remove the quick-release
axle 1 while supporting the
wheel.
Roll front wheel forward to re-
move it.
Installing the front wheel
WARNING
Use of a wheel which does
not comply with series speci-
fications
Malfunctions during control inter-
ventions by ABS and DTC
Please see the information on
the effect of wheel sizes on the
ABS and DTC chassis control
systems at the beginning of
this chapter.
ATTENTION
Tightening of screwed con-
nections with incorrect tight-
ening torque
Damage or loosening of screwed
connections
Always have the tightening
torques checked by a spe-
cialized workshop, preferably
an authorized BMW Motorrad
retailer.
ATTENTION
Front wheel installation op-
posite the running direction
Accident hazard
Observe running direction ar-
rows on tire or rim.
Roll front wheel into front
suspension.
Lift the front wheel and install
the quick-release axle 1 with
the specified torque.
Quick-release axle in
threaded bush
37 lb/ft (50 Nm)
Tighten the clamping bolts 2 to
the appropriate torque.
10
183
z