BMW S 1000RR Rider's Manual page 144

and remove it in a downward
8
motion.
142
Disconnect the connector for
the right-hand turn signal 1 and
the left-hand turn signal 2.
z
NOTICE
If the mirrors with integrated turn
signals are removed for racetrack
use, the vehicle electronics will
interpret this as a defective light
and the corresponding warning
will appear in the display. This
warning is suppressed by deac-
tivating the Light warnings
function in the RACETRACK CON-
FIGURATION menu.
Remove the nuts 1 and 2 on
the left and right and take off
the mirror.
Carefully thread out the cable.
Fasten the trim panel 1 on the
left-hand and right-hand fairing
bracket 2. If cable straps are
used, protect areas that could
possibly chafe with adhesive
tape.
NOTICE
Use the M Cover Kit from
BMW Motorrad to cover the
exposed screw sockets and re-
secure the components.