BMW S 1000RR Rider's Manual page 189

Roll the rear wheel on the sup-
port into the swinging arm.
Insert the brake caliper 1 with
brake-caliper support 2 into the
guide 3 of the swinging arm.
NOTICE
Ensure that the brake line and
ABS sensor cable are correctly
positioned. The brake line and
the ABS sensor cable must be
located in their guides in order
to prevent contact with the rear
wheel or exhaust system.
Roll the rear wheel as far for-
ward as possible and lay the
chain 1 on the sprocket wheel.
Insert the right-hand adjust-
ment plate 1 into the swinging
arm.
Raise the rear wheel and
work the quick-release axle 2
through the adjustment plate
and into the brake-caliper
support and the rear wheel.
Make sure that quick-release
axle meets the recess for key
surfaces.
10
187
z