BMW S 1000RR Rider's Manual page 49

Possible cause:
ABS self-diagnosis rou-
tine not completed
ABS function is not available
as self-diagnosis has not been
completed. (The motorcycle
must reach a specified mini-
mum speed before the system
can check operation of the
wheel sensors: min 3 mph
(min 5 km/h))
Ride off slowly. Please note
that the ABS function is only
available after the self-diagno-
sis has completed.
ABS deactivated
ABS indicator and warning
light lights up.
Possible cause:
The ABS system was deacti-
vated by the rider.
Switch on ABS function
( 150).
ABS fault
ABS indicator and warning
light lights up.
Limited ABS avail-
ability! Onward jour-
ney possible. Ride care-
fully to next specialist
workshop.
Possible cause:
The ABS control unit has
detected an error. The
partial integral brake and the
Dynamic Brake Control function
have failed. The ABS function is
limited.
It remains possible to continue
riding. Take note of additional
information on special situa-
tions that can lead to an ABS
fault message ( 155).
Have the malfunction corrected
as soon as possible at an
authorized specialist workshop,
preferably an authorized
BMW Motorrad retailer.
ABS failure
ABS indicator and warning
light lights up.
ABS failure! Onward
journey possible.
Ride carefully to next
specialist workshop.
Possible cause:
The ABS control unit has de-
tected an error. The ABS func-
tion is not available.
It remains possible to continue
riding. Take note of additional
information on special situa-
tions that can lead to an ABS
fault message ( 155).
Have the malfunction corrected
as soon as possible at an
authorized specialist workshop,
preferably an authorized
BMW Motorrad retailer.
3
47
z