BMW S 1000RR Rider's Manual page 176

10
174
Front brake-pad wear
limit
min 0.04 in (min 1 mm) (Only
z
friction material without carrier
plate)
If brake pads are worn:
WARNING
Dropping below the minimum
pad thickness
Reduced braking action, damage
to the brake
In order to ensure the operat-
ing reliability of the brake sys-
tem, make sure that the brake
pads are not worn beyond their
minimum thickness.
Have brake pads replaced at
an authorized service facil-
ity, preferably an authorized
BMW Motorrad retailer.
Checking the rear brake
pad thickness
Park motorcycle on a level, firm
surface.
Conduct a visual inspection of
the brake pad thickness. Direc-
tion of view: from rear, looking
at brake pads 1.
Rear brake-pad wear
limit
min 0.04 in (min 0.9 mm)
(Only friction material without
carrier plate.)
If brake pads are worn: