BMW S 1000RR Rider's Manual page 89

menu. The following Bluetooth
connections are displayed:
Mobile device
Rider's helmet
Passeng. helmet
The connection status for mobile
end devices is displayed.
Connect mobile end
device
Perform pairing ( 86).
Activate the Bluetooth function
of the mobile end device (see
operating instructions for the
mobile end device).
Select Mobile device and
confirm.
Select Pair new mobile de-
vice and confirm.
Mobile end devices are searched
for.
During the pairing, the
Bluetooth symbol flashes in
the lower status line.
Visible mobile end devices are
displayed.
Select the mobile end device
and confirm.
Observe the instructions for the
mobile end device.
Confirm that the codes match.
The connection is established
and the connection status is
updated.
If the connection cannot be
established, the troubleshoot-
ing chart in the Technical data
chapter may provide assis-
tance. ( 213)
Depending on the mobile end
device, telephone data is trans-
ferred to the vehicle automati-
cally.
Telephone data ( 95)
If the phone book is not dis-
played, the troubleshooting
chart in the Technical data
chapter may provide assis-
tance. ( 214)
If the Bluetooth connection
does not work as expected,
the troubleshooting chart in the
Technical data chapter may
provide assistance. (
Connect the rider's
helmet and the passenger
helmet
Perform pairing ( 86).
Select Rider's helmet or
Passeng. helmet and con-
firm.
Show the communication sys-
tem of the helmet.
Select PAIR NEW RIDER'S
HELMET or PAIR NEW PASS.
HELMET and confirm.
Helmets are searched for.
During the pairing, the
Bluetooth symbol flashes in
the lower status line.
Visible helmets are displayed.
Select helmet and confirm.
5
87
214)
z