General Purpose Ipl> Commands - Nortel Succession 1000 Installation And Configuration Manual

Page 88 of 116 Command line interface (CLI) commands
General purpose IPL> commands
Table 9
General purpose commands (Part 1 of 3)
IPL> command
i
routeAdd
routeShow
553-3001-212 Standard 1.00
You must log into the Succession Signaling Server to use CLI, using
Procedure 7 on page
Many of these commands are also available in Element Manager. The tables
in this section list the available commands, and indicate if each command is
available in Element Manager.
For more information on CLI commands, refer to IP Line: Description,
Installation, and Operation (553-3001-365). For more information on
Element Manager, refer to Succession 1000 Element Manager: System
Administration (553-3001-332).
Table 9 lists the general purpose IPL> commands. These commands must be
entered at the vxWorks
Description
Displays the current task list.
Adds a route to the network routing table.
Displays the current host and network routing
tables.
October 2003
79.
TM
shell.
Element
Manager
!
!