Logging In To The Succession Signaling Server - Nortel Succession 1000 Installation And Configuration Manual

Page 78 of 116 Software installation
Figure 43
Quit
Succession Enterprise Software Signaling Server Install Tool (sse-x.xx.xx)
=====================================================================
You have selected to quit the Install Tool.
Before quitting and rebooting the system, remove all disks (floppy,
CDROM) from the drives.
Please enter:
<CR> -> <m> - Return to the Main Menu.
<q> - Quit and reboot the system.
Enter Choice> q
Rebooting system ...

Logging in to the Succession Signaling Server

553-3001-212 Standard 1.00
19 Remove the CD-ROM from the drive and reboot the system.
Note: After software installation and reboot, a Follower Succession
Signaling Server sends out BOOTP requests and waits for a response.
Since the Follower Succession Signaling Server is not yet configured in
an IP Telephony node, there is no BOOTP response. Do not wait for this
response; go directly to "Adding a Follower Succession Signaling Server
to a node" on page
Use Element Manager to install the Follower Succession Signaling Server in
the IP Telephony node.Refer to "Adding a Follower Succession Signaling
Server to a node" on
Use this procedure to log in to the vxWorks
Signaling Server from a maintenance terminal.
October 2003
84.
End of Procedure
page 84.
TM
shell to access the Succession