Mounting The Sensor Adapter - Harvia sentiotec HWO-035NS-P Instructions For Installation And Use Manual

Installation instructions, only for experts p. 12/30

4.4. Mounting the sensor adapter

(rear-wall heaters from 8 kW to 10.5 kW only)
Fasten the sensor adapter A (supplied with the heater) in the position on
the sauna wall stated in "Sensor position" on page 11 using the wood
screws B.
Push the sensor cable C through the sensor adapter A and the sauna wall.
Then mount the sensor D on the front of the sensor adapter A.
Make sure the screws go into the holes provided.
B
C
D
A A B