Commissioning; Filling The Stone Container - Harvia sentiotec HWO-035NS-P Instructions For Installation And Use Manual

Instructions for use for the user

6. Commissioning

6.1. Filling the stone container

WARNING!
Risk of fire due to overheating
If the sauna heater is used without sauna stones, the cabin walls will
become extremely hot. This could cause fires.
● NEVER operate the sauna heater without the sauna stones.
The amount of stones suited to your heater output can be found
in chapter 12. Technical data (see page 28).
1. Wash the stones thoroughly using water and a brush before use.
Do not use any cleaning additives.
2. Before filling the heater with the sauna stones, check them for foreign objects
and remove any remaining packaging.
3. Lift the infusion channel 1 off the stone container 2 and stack the appro-
priate quantity of stones for the heater evenly in the stone tray 2.
4. Stack the sauna stones loosely so that air can flow through the gaps.
Make sure that the sauna stones do not protrude beyond the edge of the
stone container.
5. Put the infusion channel 1 back on the stone container. Make sure it is
correctly locked in place.
p. 21/30
EN