Installation And Connection; Installation Location And Sensor Position - Harvia Sentiotec Concept R CP-RCB-090 Instructions For Installation And Use Manual

Installation instructions, only for experts

4. Installation and connection

Take the following points into account when positioning and connecting the sauna
heater:
WARNING!
Danger of electric shock
The sauna heater may only be installed and connected when the
power supply is disconnected.
A fully disconnecting all-pole isolating device compliant with overvoltage
The Concept R combi sauna heater is a free-standing heater. It does not need
example.

4.1. Installation location and sensor position

Position the heater centrally in front of the air intake opening in the cabin wall.
Install the temperature sensor with excess temperature cut-out to the cabin wall
above the centre of the sauna heater. Maintain a distance of 15 cm to the sauna
cabin roof.
to the cabin roof above the centre of the heater.
p. 10/26
Fig. 1.