Installation instructions, only for experts
4.6. Mounting the infusion hose
Put the open hose clip 2 on the infusion hose 1. Push the hose over
the connecting piece 3.
Tighten the hose clip with a screwdriver.
Laying the infusion hose
When laying the hose, make sure it slopes over its full length. Water that accu-
mulates at low points can impair the air quality after long periods of non-use.
1
Completely open the hose clip A and put it on
the infusion hose B.
2
Then guide the infusion hose over the
connection piece of the infusion bowl C.
Fasten the hose with the clip A.
p. 14/30
1
2