Climatic And Mechanical Environmental Conditions; Ambient Conditions - Siemens SINUMERIK ONE PPU 1740 Series Equipment Manual

Application planning

4.3 Climatic and mechanical environmental conditions

4.3 Climatic and mechanical environmental conditions
4.3.1

Ambient conditions

The components of the SINUMERIK ONE system exceed the requirements according to
EN 61800‑2 with regard to shipping and storage conditions.
The following data applies under the following conditions:
● Long-term storage in the transport and product packaging:
At weather-protected locations that have continuous contact with outside air through
openings.
● Transport in the transport packaging:
– In unventilated containers under conditions not protected from weather effects.
– In the "cold" in accordance with outside air.
– Air transport in the air-conditioned cargo hold.
Table 4-1
Type of condition
Classification
Climate class
Ambient temperature
Biological environmental
conditions
Chemically active environ‐
mental conditions
Maximum permissible tem‐
perature change
Relative humidity
Precipitation, rain
Water other than rain
Condensation, splash water,
icing, salt spray
Mold growth, slime, rodents, termites and other animal vermin are not permissible.
1)
In marine- and weather-resistant transport packaging (container).
2)
For storage in the transport packaging.
3)
For storage in the product packaging.
4)
Note
Remove the transport protective foil and packaging material before installing the components.
46
Ambient conditions during storage and transport
Transport
EN 60721‑3‑2
2K4
From -40° C to +70° C
2B1
1)
2C2
2)
Direct interaction in air/air:
-40°/+30° C at 95% relative humid‐
ity
5 to 95%
6 mm/min
1 m/s and wet loading surfaces
Permissible
Permissible range/class
1)
3)
Equipment Manual, 01/2019, A5E47615272B AA
Storage
EN 60721‑3‑1
1K4
From -25° C to +55° C
1B1
1)
1C2
2)
30 K/h
Not permitted
Not permissi‐ 1 m/s and wet load‐
ble ing surfaces
4)
Not permissi‐ Permissible
ble
4)
3)
3)
PPU 1740