System characteristics
3.3 Memory card interface
3.3.2
Inserting the system SD card
Inserting the system SD card
Slot and mounting position:
Electrostatic Device (ESD)
Before you touch a SD card, discharge yourself at the cabinet or at the ground terminal.
The SD cards should only be inserted or removed when the control unit is disconnected from
the power supply.
Procedure:
1. Switch off the power supply.
2. Open the plastic cover.
Figure 3-11
38
CAUTION
SD card slot and plastic cover
Equipment Manual, 01/2019, A5E47615272B AA
PPU 1740