Fill The Coolant Bottle - Canon Arizona 1300 Series User Manual

Fill the Coolant Bottle

Introduction
Coolant is a used to maintain the temperature of the ink in the printheads.
It is important to check the coolant bottle, located in the Primary Ink Bay, to see if the level is low.
Keep the coolant level up to ensure proper ink temperature.
NOTE
The Accessory Pack that ships with a new printer contains a 2 litre container of coolant. During
an install the coolant system requires 1.8 litres to fill the coolant bottle and lines. We suggest
that you order more coolant from your sales representative so that you will have some when
you need to top up the system.
Procedure
1. Unscrew the nipple from the coolant bottle lid to remove the coolant tube.
[94] Coolant Bottle is Located in the Primary Ink Bay
2. Remove the coolant bottle from the ink bay.
3. Unscrew the coolant bottle lid.
4. Get the coolant fluid container that shipped with the printer.
5. Fill the coolant bottle.
6. Attach the lid to coolant bottle and return it to the Primary ink bay.
7. Store the coolant fluid until it is needed again.
Fill the Coolant Bottle
Chapter 11 - Maintenance 207