Use the Arizona 13x0 XT Vacuum System
Use the Arizona 13x0 XT Vacuum System
Introduction
The Arizona 13x0 XT uses vacuum to secure media to the printer table. Two independent vacuum
pumps provide vacuum to the table, which is divided into multiple vacuum zones. Pump 1
provides vacuum to the A Zones and the C Zone. The operator can control vacuum flow to the C
Zone with the manual On/Off valve. Pump 2 provides vacuum to the B Zones. All XT printers are
shipped with metric vacuum zones. It is possible to change the configuration from metric to
imperial in the field by a qualified service technician (the technician who installs your printer can
do this, if needed).
88
Chapter 6 - Operate the Arizona 13x0 XT