Canon Arizona 1300 Series User Manual page 162

Print White Ink Jobs
[87] Hold for Operator
5. Submit the print job (i.e., process/rip the job).
6. Define or verify the layer definitions prior to sending the job to the printer.
7. Send the job to the printer and then print it.
Configuring Quality-Layered Print Mode To Print White Ink
The Quality-Layered print mode can be used to print three, two, or one layer of image data or
printer generated flood data. All layers are independent of each other.
Where to Define Layers
Quality-Layered layers are defined in ONYX media - mode options, but may be optionally
overridden within a Quick Set - Media Options, and optionally overridden on a per job basis by
modifying the printer settings of a processed job in RIP Queue - right click the job and edit print
settings. Editing the print settings for a job displays the following dialogue:
162 Chapter 9 - Manage a White Ink Workflow
NOTE
Optional - not required if the layer definitions were correctly specified in the ONYX
profile or quickset.
NOTE
To preview the layer order of the job on the printer, click Layers for the job in the
printer software UI.