Maintenance Guidelines - Canon Arizona 1300 Series User Manual

Maintenance Guidelines

Maintenance Guidelines
Introduction
This section describes what is required for printer maintenance.
Equipment
• Foam Tipped Swab (3010118211)
• Flush (3010106646 Flush UV 1 Litre)
• Bottle-HDPE 125ml for flush (3010105433)
• Isopropyl alcohol (IPA)
• Cloth-Poly Wipe 10cm x 10cm (lint-free)
CAUTION
Wear gloves when contact with ink or maintenance materials is possible. Gloves should always
overlap sleeves. Follow the ink related Safety Data Sheets (SDS) guidelines carefully in order to
ensure maximum safety. For example use Ansell Microflex 93-260 gloves, which offer a
protection against UV inks and flush up to one hour. Pollution with other chemicals can shorten
the protection time against UV inks and flush.
Wear eye protection as prescribed in this document when performing a task or action in this
area.
Schedule: Perform Daily maintenance at the beginning of each work day.
Procedure
AMS Printhead Maintenance
Maintain White Ink
Clean Horizontal Surfaces
Clean Automatic Maintenance Station
Clean Ink Spit Tray
Clean Carriage Underside
Agitate White Ink Bag
Clean printheads using swabs
Replace UV LED unit Filters
Remove Ink from Table
Empty the Waste Trays
Clean UV LED unit window
Check Coolant level
Clean Linear Gantry Rails
Change Ink Filters
Bleed ink filter (CMYKcm)
Bleed ink filter (White)
180 Chapter 11 - Maintenance
Frequency
Daily and as needed
Daily
Daily
Daily
Daily
Daily
Weekly
Weekly
Monthly or as needed
As needed
Weekly or as needed
Monthly or as needed
Monthly (fill as needed)
Monthly or as needed
After 50 litres of ink, or if pigment looks weak
After 5 Bags
After 1 Bag