Canon Arizona 1300 Series User Manual page 209

[96] Dust on the gantry rail
Procedure
1. Open the Maintenance Station drawer to ensure that there is no possible gantry or carriage
movement.
2. Use a dry lint-free cloth to remove any visible debris that has accumulated next to the bearing
shields. It is only necessary to clean the outside bearing shields. When removing debris, always
wipe away from the shields.
3. Wipe any debris from the gantry rails. Do this gently so that you do not remove the grease that
lubricates the bearings as they move along the rails.
4. Close the Maintenance Station drawer.
Clean the Gantry Rails
Chapter 11 - Maintenance 209