Roll Media Option Maintenance
Roll Media Option Maintenance
RMO Maintenance Guidelines
Introduction
This section provides information about what is required for proper RMO maintenance and
cleaning.
NOTE
Any time there is any foreign matter or debris on the platen or the capstan it must be removed
immediately. Any spilled UV ink must be removed immediately, before it can cure from
exposure to light.
RMO Maintenance
The following table provides our recommended maintenance activities. Frequency will depend on
environmental conditions and operator work habits. How to clean the capstan is explained in
detail in the next section.
Maintenance Action
Clean the platen
Clean the capstan
Clean the media loading bay
216
Chapter 11 - Maintenance
Contaminant
Ink
Glue (release liner)
Silicon (release liner)
Paper dust
Coffee or tea
Ink (cured, uncured)
Glue (release liner)
Silicon (release liner - e.g. Avery control tag 180)
Dust
Ink