Flush - Canon Arizona 1300 Series User Manual

Flush

Flush Care and Storage
A small bottle (125ml) is supplied with the printer accessory kit. Use it only to hold flush. Tip:
before you begin printhead swabbing or cleaning the AMS, fill the bottle and place several swabs
into it so they are soaked in flush and ready to use.
Before first use, proceed as follows: Label this bottle as "Flush", add the actual date of receipt of
the bottle and the date of expiry (two years after receipt).
CAUTION
Discard the bottle if it shows any sign of wear or physical damage (cracking or leaking) or at
expiry.
Flush must not be exposed to air for long periods. Always store flush in a sealed container. Flush
has a recommended shelf life of one year. Discard it after one year has passed.
Flush is a solvent and should not be splashed or sprayed around sensitive areas such as the
electronics of the printheads. When cleaning printheads, make sure it is only placed on the
nozzles and does not move up the sides.
Chapter 3 - Safety Information
Flush
27