Configure Onyx Thrive For White Ink - Canon Arizona 1300 Series User Manual

Configure ONYX Thrive for White Ink

Configure ONYX Thrive for White Ink
Introduction
This section describes how to configure ONYX Thrive to recognize white ink workflow elements
and thus allow you to apply the approach that is best for your print job application. In order for
the ONYX Thrive software to successfully address white ink workflow data, there are options in
the software that must be configured. It also explains how you need to use specific ONYX media
profiles to prepare white ink print jobs.
Procedure
1. In your Quick Set, or in Preflight/Job Properties/Postscript turn off two-stage processing (make
sure the box is not checked).
[54] Turn off Two Stage Processing
ONYX Thrive software will now accept print jobs with white ink or varnish data. To prepare a
print job for white ink you need to use an ONYX media profile (media model) as shown below.
132 Chapter 9 - Manage a White Ink Workflow