Maintenance Guidelines - Canon Oce Arizona 1200 Series User Manual

Maintenance Guidelines

Maintenance Guidelines
Introduction
This section describes what is required for proper printer maintenance.
Maintenance Equipment
• Foam Tipped Swab (3010118211)
• Flush (3010106646 Flush UV 1 Liter)
• Bottle-HDPE 125ml for flush (3010105433)
• 99.9% Isopropyl alcohol (IPA)
• Cloth-Poly Wipe 10cm x 10cm (lint-free)
• Dust cloths
CAUTION
When cleaning areas of the printer that have uncured ink contamination, the following PPE is
recommended - nitrile gloves (Ansell Touch N Tuff gloves, 92-600 for smooth or 92-605 for
textured), a lab coat and safety glasses with side shields. It is recommended that gloves are
used for one time only and should be removed and replaced with new gloves if contaminated
with inks or damaged. Chemicals in UV inks can penetrate nitrile gloves in less than 10
minutes. UV-curable inks can contain sensitizing chemicals which can lead to sensitization
upon prolonged or repeated exposure to skin. Océ recommends that contaminated gloves are
removed and replaced with new gloves.
Operator Maintenance Schedule
Maintenance Frequency
Procedure
Printhead Maintenance
(manual or AMS, if that option is installed)
Clean all horizontal surfaces
Clean AMS (if installed)
Clean Ink Spit Tray
Clean Carriage Underside
Maintain White Ink
Clean (Swab) Printheads
Replace UV Lamp Filter
Remove Ink from Table
Empty the Waste Trays
Check Coolant
Clean Gantry Rails
Check UV lamp windows
Change Ink Filters
Change both UV Lamp bulbs
Change Coolant
168 Chapter 12 - Printer Maintenance
Frequency
Daily and as needed
Daily
Daily
Daily
Daily
Daily
Weekly (daily with IJC258 ink)
Every two weeks
As needed
Weekly or as needed
Monthly (fill as needed)
Monthly or as needed
Monthly (clean if necessary)
After 50 liters of ink, or if pigment looks weak
After 500 hours to prevent insufficient curing
Yearly (requires a service call)
Océ Arizona 1200 Series