Install Magcore® Cuvette; Install Tube, Tip; Install Reagent Cartridge - RBC Bioscience MagCore Super Engineer In Training Manual

━ Install MagCore® Cuvette
(MagCore Super Only / for optic test)
1. Please put MagCore® Cuvette into the
corresponding sample's well. The installation
of Cuvette is unidirectional. It is not possible to
put it into the well if the direction is not correct.
2. Put the 200 μl SP tip into the W4 of the T-Rack.

━ Install Tube, Tip

W5 Elution Tube
W4 200μl SP Tip
W3 Pipette Tip
W2 DNase / Tip Holder set
W1 Sample Tube - FS Tip
Please install the Tip and Tube
according to the instructions on the
extraction kit user manual.
Warning :
Please do not use the Tips and Tubes that are not provided by the original manufacturer.
The test result may be not correct and the machine may be damaged due to different tip
designs.
When installing it,
please do not scratch
the optic test window.

━ Install reagent cartridge

Please insert the front end of the cartridge into the space
below the fixing plate of the Cartridge Rack.
Please insert the Cartridge Rack before
the T-Rack.
1. Put the tip into the corresponding well according to the left
figure.
2. Put the T-Rack into the machine.
RBCBioscience
16