PLC updating
1. Turn off the power supply of the machine.
2. Open The Top Service Lid
PLC RS232 Communication Cable
Combine two cables
73
3. Change the switch of the PLC from "Run" to
"Stop", and replace the connection wire with
the PLC-RS232 communication connection
wire.
Switch " RUN " to " STOP
1
2
Disconnect original Cable and change to "PLC RS232
Cable "
4. Connect to your laptop
5. Power ON
6. Open the "EasyDownload_v1.83" folder and
open "EasyClient" software.
1
2