Stop; Enable The Barcode Function - RBC Bioscience MagCore Super Engineer In Training Manual

━ Stop

1
During the test process, please press the Stop
button if you want to pause.
2
Please press the Abort button if you want to end
the test.
3
The test is aborting, and the machine is returning
to the initial position. Please do not operate the
machine during the process.
4
The machine has been stopped and reset, please
press the OK button to go back to the main menu.
21

━ Enable the barcode function

The barcode function of MagCore HF16 Plus is not
enabled by default. If you already purchased the
barcode scanner, you have to enable the scanner
function.
1
Select maintenance.
2
Select Scanner Setup.
3
Select Enable Scanner.
The Barcode function is enabled.
(MagCore HF16 Plus Only)