Barcode Scanning And Editing; Optic Data - RBC Bioscience MagCore Super Engineer In Training Manual

━ Barcode scanning and editing

1
Please select the Barcode button in the main menu.
2
[ Barcode main menu]
Delete all saved barcodes.
The system memory only can save 16
barcode record.
Print the barcode.
Please press the Scan button if you want to scan it.
3
Press the number to select the slot.
Press the X button to delete saved barcodes.
You can press the Start button to execute the test
after scanning.
Please refer to the System Overview chapter for the
information about the numbers of the wells to be
scanned.
(optional for MagCore HF16)

━ Optic data

1
Please select the Optics Data button in the main
menu.
2
[ Optics Data main menu ]
The machine will automatically save two batches of
data in the memory.
Browse or save the
data in the USB
Flash Drive.
Press the number to view the each data.
Save file
Insert the USB Flash Drive and then press the
Save button to store the current measured
values after the USB icon shows in the status
bar. Please take out the USB Flash Drive and
you can perform other operations after the
icon of USB Flash Drive disappears.
Please refer to the System Overview chapter for the
information about the numbers of the slots.
Please save the data in the USB Flash Drive and
transfer to computer, or the data in the USB Flash
Drive may be overwritten later.
File name:
OpticsSampleData.cvs
Previous file name:
Pre_OpticsSampleData.cvs
(MagCore Super Only)
Print data.
RBCBioscience
22