3.2.2
Selecting a New Setting From a List of Choices
Use the procedure described below to select a new setting for parameters that present a list of
choices (e.g., PV display, Temperature Units, Pressure Units etc.).
↵
1. Press
to begin the edit process.
o The Standard Display will show the current setting of the item on the lower line.
2. Press the buttons to scroll through the list of choices.
↵
3. Press
to make your selection. The new selection will be stored in the Remote Indicator
and will be displayed on the lower line, right justified.
3.2.3
Main Menu
Level 1
<Exit>
Diagnostics
Display Setup
Device Setup
Information
3.3
Configuration
3.3.1
Display Setup Menu
The LCD contrast setting can be used to set the LCD contrast so that the display is optimally
readable.
<Return> Return to the Level 1 menu
<Return>
LCD
Set
Contrast
Contrast
Revision 1
RMA805 Enraf FlexLine Remote Indicator User's manual
Table 3: Main Menu Structure
Level 2
n/a
Critical
Non-Critical
LCD Contrast
Parameters
HART Setup
Display
Comm Module
Table 4: Display Setup Menu
0 – 9
Adjust the LCD contrast level.
Default: 5
Level 3
n/a
For details go to the Diagnostics Menu table in
paragraph 3.4
For details go to the Display Setup Menu table
in paragraph 3.3
For details go to the Device Setup Menu table in
paragraph 3.3
For details go to the Information Menu table in
paragraph 3.3
↵
Press
to edit,
↑ or ↓ to select
↵
number and
to
enter.
13