Figure 7: Mounting Bracket Secured To A Remote Indicator; Figure 8: Pipe Mounting Bracket Secured To A Horizontal Or Vertical Pipe - Honeywell Enraf FlexLine RMA805 User Manual

Figure 7: Mounting Bracket Secured to a Remote Indicator

3. Position the bracket on a 2-inch (50.8 mm) horizontal or vertical pipe, and install a "U"
bolt around the pipe and through the holes in the bracket. Secure the bracket with (2) M10
hex nuts, (2) flat washers and (2) lock washers provided. Refer Figure 7.

Figure 8: Pipe Mounting Bracket Secured to a Horizontal or Vertical Pipe

8 RMA805 Enraf FlexLine Remote Indicator User's manual Revision 1