Introduction; About The Rma805 Enraf Flexline Remote Indicator; Features And Options; Table 1: Features And Options - Honeywell Enraf FlexLine RMA805 User Manual

1.1

About the RMA805 Enraf FlexLine Remote Indicator

The RMA805 Enraf FlexLine Remote Indicator provides a means of remote-mounting a display
that is associated with a Honeywell Enraf FlexLine Gauge. The Remote Indicator can be located
hundreds of meters away from the FlexLine Gauge providing easy access to data.
The Remote Indicator must be connected to the local HART compatible bus of the Enraf
Smartradar FlexLine or the Enraf SmartServo 954.
The Remote Indicator can be used in hazardous or non-hazardous environments. When either the
FlexLine Gauge or the Remote Indicator is used in a hazardous environment, the Remote Indicator
must be configured as per local installation codes.
The display module fitting allows for rotation in 90-degree increments, allowing the Remote
Indicator to be mounted in various orientations.
1.2

Features and Options

Feature/Option Standard/Available Options
Communication HART® Compatible using Enraf FlexLine device specific commands only.
Protocol Cannot be used in combination with a standard HART transmitter.
Display Product level and product temperature with Status and Alarm information.
User Interface (UI) Advanced Digital Display:
Three-button operation
Display language: English
Approvals ATEX, CSA, IECx and NEPSI
Mounting Brackets Pipe mounting and wall mounting brackets in carbon steel and 316
stainless steel.
Firmware Upgrade SAT tool for firmware upgrade
Revision 1 RMA805 Enraf FlexLine Remote Indicator User's manual

Introduction

Table 1: Features and Options

•
0-, 90-, 180- & 270-degree viewing position adjustments
•
Measurement Units configured via the Associated Gauge
•
Three-mode operations: Offline mode, Standby mode, Data
display mode and Menu Navigation
Refer to Appendix A for details.
.
Page 1