Source Audio True Spring Reverb User Manual page 32

•
Import: Use the Import button to upload saved .pre files to your Neuro Desktop Editor. Upon
clicking the Import button you will be asked to find the .pre file. Go to the Neuro presets
folder, select file, and upload.
•
Export: Select a preset and then select the Export button. A window will pop up, asking you
to name, tag, and select a location for the preset. After the preset is saved, the .pre file can
be shared via email or any common file sharing method.
•
Refresh: Hit the Refresh button to restore the Neuro Desktop edits to the state immediately
after your last Save procedure.
•
Hardware Preset: This field is where all of your pedal presets are listed. Use the Save As
button to select where you would like to store a preset. The three positions labeled "001:,"
"002:," and "003:," represent the three toggle switch positions (left to right) in Preset Mode
(Red LED). These three presets will engage with all the parameters pre-programmed and
disregard the physical positions of the knobs on the pedal. The next three positions labeled
"Effect Selector Short," "Effect Selector Long," and "Effect Selector Tank," represent the
three toggle switch positions in Knos Mode (Green LED). These three presets will engage with
all the parameters pre-programmed with the exception of the physical knobs. In Knobs Mode,
the physical position of the knobs will affect their corresponding parameter.
SA247 True Spring Reverb User Guide 32