0.5 metres of free space all around it. – Before using the device, check that the nuts and bolts are securely tightened. – The safety of the device can only be maintained if it is regularly examined for damage and/or wear and tear. Virtufit TR-100 Treadmill...
Page 4
– Maintenance assembly and repair work not carried out by an official dealer. – In the event of improper use, neglect and / or poor maintenance. – Failure to maintain the device in accordance with the manufacturer’s instructions (see the enclosed manual). Virtufit TR-100 Treadmill...
Page 5
When you open the carton, and you will find the below parts in the carton: DESCRIPTION Main frame Allen key 5mm Bold Lock washer Security key Oil bottle Bolt MP3 cable NOTE: Do not connect the appliance to the mains before it has been completely set up. Virtufit TR-100 Treadmill...
Page 6
In this way you prevent the head of the socket head screw from being rotated. STEP 1 • Open the carton, get out the above spare parts, put the Main Frame on the level ground. Virtufit TR-100 Treadmill...
Page 7
Hold the console frame, use the 5# Allen Wrench, lock the console frame onto left and right upright tube with bolt M8*16(51)& lock washer (64) as the picture above. NOTE: When folding, please don’t press the computer connecting wires. Virtufit TR-100 Treadmill...
Page 8
ASSEMBLY INSTRUCTIONS STEP 3 • Hold up the Upright. NOTE: Please hold the L& R upright, avoid to have any hurt. Virtufit TR-100 Treadmill...
Page 9
Use 5# Allen wrench, drill through M8*16 Bolt (51) to Lock Washer (64) then lock the right upright tubes into the main frame. Reference the picture above. NOTE: Hold the upright tube at when locking the upright tube to main frame. Virtufit TR-100 Treadmill...
Page 10
ASSEMBLY INSTRUCTIONS STEP 5 • Put on the safety key (71) on the computer. Virtufit TR-100 Treadmill...
NOTE: Check if everything is assembled according to the instruction and that the bolts are tight. If everything has been checked properly, please follow the following instructions. Before using the treadmill, read the instructions carefully. Virtufit TR-100 Treadmill...
Repeat process until the belt becomes central. 03. Running belt jam: If the running belt is in dead condition, use the Allen key to turn the screw 1/2 a turn both left and right until the jam solved (see fig 3). Virtufit TR-100 Treadmill...
Be sure to clean the exposed area of the belt and the foot rails of the treadmill on both sides. In addition, wear clean shoes to reduce the risk of contamination of the treadmill. Remove the hood at least once a year to vacuum underneath. Virtufit TR-100 Treadmill...
• Use a dry cloth to clean the control panel and areas around the power switch. Use a soft clean cloth and cleanser to remove stubborn stains and dirt off the running belt. • Tighten the running belt once a month. • Keep your treadmill in a safe dry place away from heat and water. Virtufit TR-100 Treadmill...
Page 15
Use a soft clean cloth and detergent to remove stubborn stains and dirt from the treadmill. • Tighten the treadmill once a month. • Keep your treadmill away from heat and water in a safe, dry place. Regular maintenance prolongs the life of your treadmill and prevents injury! Virtufit TR-100 Treadmill...
If all of the above is correct, replace the console. Problem: Security key signal is not recognized by the computer, showing E07 or “--- --- ---”. Solution: Check if the magnetic parts of the safety key are good plugged in. Virtufit TR-100 Treadmill...
Page 17
Check if the power supply is 8V, change the console, if not, change the computer. Solution: First turn off the device, restart the engine, see if the screen is Sceen display is poor back to normal, if not, take out the computer and the fixed PCB. Virtufit TR-100 Treadmill...
Page 18
Check if the thread of the handle is good. • If connection is good, change the computer. Solution: Button on the handle does • Check that the handle wire is good and the connection is good is not work connected. • Please replace the handle. Virtufit TR-100 Treadmill...
Page 19
CONTROL PANEL CONSOLE BUTTON FUNCTION TIME Shows time. DISTANCE Shows distance. CALORIEN Shows calories. PULSE Shows heart beat. SPEED Shows speed. INCLINE Shows incline. Virtufit TR-100 Treadmill...
Page 20
(3, 6, 9, 12) Adjust the incline. Press the button to adjust incline section when run, and INCLINE ^ ^ /v adjust the data when stop. INCLINE Adjust the incline quickly. (3, 6, 9, 12) BUTTON Speed button. HANDLE (R) Virtufit TR-100 Treadmill...
In order to get the heart beat more correct, please test when the machine stop, and holding the hand pulse more than 30 seconds. The heart beat data is just for reference, can not be as the medical data. Virtufit TR-100 Treadmill...
Page 22
Pull out the safety cord and the treadmill will stop immediately. All windows will display “---”, the buzzer will sound “B-B -” 3 times, then the walking belt will stop. Attach the tip of the safety cord magnet to the computer and the treadmill will start moving again. Virtufit TR-100 Treadmill...
The purpose of cooling down is to return the body to its normal or near normal, resting state at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows blood to return to the heart. Virtufit TR-100 Treadmill...
Page 28
For questions or missing parts please contact your dealer.