Lubricating The Belt - VIRTUFIT TR-100 User Manual

Hide thumbs Also See for TR-100:

Table of Contents

MAINTENANCE

This treadmill is equipped with a pre-lubricated, low maintenance deck system. The belt/ deck friction

may play a major role in the function and life of your treadmill, thus requiring periodic lubrication. We

recommend a periodic inspection of the deck. You need contact with our service center if you find the

damage of the deck.

We recommend lubrication of the deck according to the following timetable:

Light user (less than 3 hours/ week) annually

•

Medium user (3-5 hours/ week) every six months

•

Heavy user (more than 5 hours/ week) every three months

•

Best indicator is to lubricale when the walking platform feels dry. We recommend that you buy the

lubrication from our distributor or directly to our company.

NOTE:

Any repair need the professional technician.

• We suggest that you should cut off the power for 10 minutes after keep running 2 hours, so that it's

good for maintain the treadmill.

• For avoiding the slipping during running, the belt not too loose; for avoiding the more abrasion

between the roller and belt and maintain the machine's good running ,the belt not too tight. You can

adjust the distance between plates and belt, the belt be away from the plates about 50-75 mm on

both sides, if the best not too tight and loose.

We strongly recommend that you do the following

• Switch off and remove the power cable from the wall after every use, especially if children are

present.

• Clean your treadmill after use.

• Use a dry cloth to clean the control panel and areas around the power switch. Use a soft clean cloth

and cleanser to remove stubborn stains and dirt off the running belt.

• Tighten the running belt once a month.

• Keep your treadmill in a safe dry place away from heat and water.

LUBRICATING THE BELT

Virtufit TR-100 Treadmill

Table of Contents