Extron electronics DTP CrossPoint 84 Setup Manual page 40

2.
Click in the Address field and enter the IP address.
3.
Press the keyboard <Enter> key. The switcher checks whether it is
password-protected.
If the switcher is not password-protected, it checks and downloads
the HTML start-up page. The switcher is ready for operation via HTML
remote control.
If the switcher is password-protected, it downloads the
Authentication Required dialog box (see figure 17).
Figure 17.
4.
Enter the appropriate administrator or user password in the Password
field and click OK.
The switcher downloads the HTML start-up page (see
page 33). The switcher is ready for operation via HTML remote control.
32 DTP CrossPoint 84 • Remote Control
NOTE: For best results, Extron recommends the following
browsers and compatibility mode:
• Microsoft Internet Explorer, version 8.0 or newer, with
compatibility mode off
• Mozilla Firefox
®
• Google Chrome
®
• Apple Safari
® ®
NOTE: 192 .168.254.254 is the factory-specified default value
for this field.
Authentication Required Dialog Box
NOTE: A User Name entry is not required.
, version 6 or newer
®
, version 9 or newer
™
, version 4 or newer
figure 18
on