Home Screen - Raven Envizio Pro Series Quick Reference Manual

Home Screen

Touch anywhere it appears to return to the
Touch the:
Start Job icon to begin a new job or resume an existing job.
Tools icon to access the
settings and calibrations for the field computer and control system.
Shutdown icon to power down the field computer. The Shutdown icon only
appears when a job is not in progress. Be sure to shutdown the console
before switching the computer off.
End Job icon to close a job in progress. The End Job icon only appears if a
job is in progress and replaces the Shutdown icon on the Home screen.
Info icon in the upper, right corner of the display to view the current
software and firmware versions of the field computer. If the field computer
is connected to a CANbus system, additional system information is
available by selecting the
DGPS Status Indicator
The current source and status of DGPS reception is displayed in the upper, left
corner of the Home
OmniSTAR
RTK or
HP
CORS
The DGPS Status Indicator
if the status of Differential GPS is ready.
if an error or cautionary condition has been encountered.
if DGPS is non-functional. Make sure the DGPS antenna cable connections
are secure and the antenna has a clear, 360° view of the sky.
Tools
Screen.
OmniSTAR Satellite
XP/G2 GS
will display:
Home
Menu. The Tools Menu
on the 'About Envizio Pro' screen.
Slingshot
GS
screen.
contains the
SBAS
®
Gl1de
(WAAS/
e-Dif
EGNOS)
or
Standard
2