Table of Contents
Advertisement
CHAPTER
5
PRODUCT CONTROL HOME SCREEN
With the product control node properly installed and calibrated, the VT display can be used to monitor and
control product application without the need for additional consoles or displays in the vehicle cab. Select the
product control icon located in the VT display menu to view the main product application screen.
ISOBUS
Product
From the product control home screen, the machine operator can monitor and control the following aspects of the
product control system:
• Master (Switch)
Status
• Control Mode
(Auto/Manual)
• Application Speed • Rates Area
• Pump Status (NH3
Applicators)
Manual No. 016-0171-362 Rev. F
I SOBUS PRODUCT CONTROL
C H A P T E R 5
OPERATION
• Product Density
• Target Pressure
(Granular
Applicators)
• Pressure or Fan/
• Volume Applied
Spinner RPM
• Area Covered
• Remaining Tank/
(NH3 Applicators)
Bin Volume
• Section Status
Display
• Manual Section
Controls
37
Advertisement
Table of Contents
