Table of Contents
Advertisement
Overview
Envizio Pro Series field computers are an all-in-one tool capable of providing
product control for up to four products (with required activation key), supplying
GPS information to other in-cab devices (Envizio Pro or Envizio Pro II only), and
providing on-screen guidance during field applications. All of these features may
be controlled at the same time with an easy to use touch screen.
Several optional systems are available to enhance field operation or data
management.
Refer to the Envizio Pro Series Installation and Operation Manual or contact a
local Raven dealer for more information or a complete list of optional features or
components available for use with the field computer.
Startup
To power up the Envizio Pro,
press the power button
located on the right side of
the field computer.
Do's and Don'ts
Do
have the part number, serial number, hardware revision, and software version
available when calling for technical assistance. It is best if the user is in the
machine and in front of the field computer when calling for support.
Do
review the manual in its entirety before operating the field computer.
Don't
jump start or weld on any part of the vehicle with the field computer or any
control nodes connected to the vehicle battery. To prevent damage to the field
computer, disconnect the main and auxiliary cable connectors on the back of the
field computer. Disconnect any power connections to control nodes to avoid
damage to electrical components.
Don't
turn the field computer off without properly closing any open jobs and
powering down the computer. If the field computer loses power during a job,
information within the job files may be lost and the associated files may become
corrupt.
Don't
use sharp objects or harsh chemicals on the field computer touch screen as
they may damage the display.
Don't
use the USB ports to charge mobile devices such as phones, tablets, or
mp3 players.
1
USB Port
Advertisement
Table of Contents
